M12 Male/Female Assembled Connector, Shielded, Screw-Type Terminal Block
| Front View | Public |  |
 |
 |
 |
 |
 |
|||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mother |  |
 |
 |
 |
 |
 |
||||||||||||||||||||||||||||||||
| Pin count | 3-Pin A-Code | 4-Pin A-Code | 4-Pin D-Code | 5-Pin A-Code | 5-Pin B-Code | 8-Pin A-Code | ||||||||||||||||||||||||||||||||
| Reference standards | IEC-61076-101 | |||||||||||||||||||||||||||||||||||||
| Rated current | 4A | 4A | 4A | 4A | 4A | 2A | ||||||||||||||||||||||||||||||||
| Rated Voltage | 250V | 250V | 250V | 250V | 60V | 30V | ||||||||||||||||||||||||||||||||
| Pulse voltage | 2500V | 2500V | 2500V | 2500V | 800V | 800V | ||||||||||||||||||||||||||||||||
| Contact resistance | ≤10 mΩ | |||||||||||||||||||||||||||||||||||||
| Insulation resistance | ≥10⁸ Ω | |||||||||||||||||||||||||||||||||||||
| Locking mechanism | Insert, tighten M12 × 1.0 screw | |||||||||||||||||||||||||||||||||||||
| Fastening torque | Recommendations: 0.4–0.8 Nm for the wiring screws, and 0.2 Nm for the terminal block nuts. For the tail clamp nut, use 0.4–1.0 Nm. | |||||||||||||||||||||||||||||||||||||
| Wiring Method | Locking screw | |||||||||||||||||||||||||||||||||||||
| Adapter wire gauge | 0.75–0.14 mm² (AWG 18–26) | |||||||||||||||||||||||||||||||||||||
| Adapter wire gauge | PG7 (4–6 mm), PG9 (6–8 mm) | |||||||||||||||||||||||||||||||||||||
| Temperature range | -25~80°C (dynamic), -40~80°C (static) | |||||||||||||||||||||||||||||||||||||
| Shell Material | Zinc die casting | |||||||||||||||||||||||||||||||||||||
| Insert core material | PA66 | |||||||||||||||||||||||||||||||||||||
| Screw material | Copper-plated nickel | |||||||||||||||||||||||||||||||||||||
| Terminal material | Copper alloy | |||||||||||||||||||||||||||||||||||||
| Seal material | Fluororubber/Silicone/Nitrile Rubber | |||||||||||||||||||||||||||||||||||||
| Screw Coating | Nickel plating | |||||||||||||||||||||||||||||||||||||
| Terminal plating | Gold plating | |||||||||||||||||||||||||||||||||||||
| Protection Level | IP67, IP68 | |||||||||||||||||||||||||||||||||||||
| Pollution Level | 3 | |||||||||||||||||||||||||||||||||||||
| Number of cores | Male leader | Mommy head | ||||||
|---|---|---|---|---|---|---|---|---|
| PG7 (4–6 mm) | PG9 (6–8 mm) | PG7 (4–6 mm) | PG9 (6–8 mm) | |||||
| 3-Pin A-code | M12-M03A-Z-SH-D6 | M12-M03A-Z-SH-D8 | M12-F03A-Z-SH-D6 | M12-F03A-Z-SH-D8 | ||||
| 4-Pin A-code | M12-M04A-Z-SH-D6 | M12-M04A-Z-SH-D8 | M12-F04A-Z-SH-D6 | M12-F04A-Z-SH-D8 | ||||
| 4-Pin D-code | M12-M04D-Z-SH-D6 | M12-M04D-Z-SH-D8 | M12-F04D-Z-SH-D6 | M12-F04D-Z-SH-D8 | ||||
| 5-Pin A-code | M12-M05A-Z-SH-D6 | M12-M05A-Z-SH-D8 | M12-F05A-Z-SH-D6 | M12-F05A-Z-SH-D8 | ||||
| 5-Pin B-Code | M12-M05B-Z-SH-D6 | M12-M05B-Z-SH-D8 | M12-F05B-Z-SH-D6 | M12-F05B-Z-SH-D8 | ||||
| 8-Pin A-code | M12-M08A-Z-SH-D6 | M12-M08A-Z-SH-D8 | M12-F08A-Z-SH-D6 | M12-F08A-Z-SH-D8 | ||||
Related Products
M8 Series Connectors
M8 Type A/B Elbow, Dual Male Connector, Pre-molded Design, Non-Shielded Cable
M8 Series Connectors
Shielded M8 Type A & B, Straight-Head, Male & Female Connectors, Molded Style, Pre-Cast Cable—Cable Ends Remain Unconnected
M8 Series Connectors
Shielded M8 Type A & B, Elbow Connector, Male & Female, Molded Style, Pre-Cast Cable—No Termination at the End
M8 Series Connectors
M8 Type A/B, Straight Head, Male & Female Connectors, Molded Style, Pre-Cast Cable—Cable End Not Terminated
M8 Series Connectors
M8 Type A/B Female Board-to-Board Connector, Front Lock/Back Lock, Pre-terminated with Electronic Wire
M8 Series Connectors
M8 Type A/B Male Board-to-Board Connector, Front/Latch or Rear-Latch Design, Pre-Assembled with Electronic Cables
M8 Series Connectors
M8 Type A/B Female Board-to-Board Connector, Front/Lock Rear Lock PCB Pin
Leave a Message Online
- Product Center
- M8 Series Connectors
- M12 Series Connectors
- I/O Industrial Data Transmission Connector
- About Jiuyou
- Company Profile
- Core Advantages
- Corporate Culture
- Solutions
- Blogs
- Business News
- Industry News
- Contact us
